Acomech Engineering - HI-FAB Products


HI-FAB
	Standard Range - Single Seal
	SSDB-E1
	SCS-E1
	SSDB -E2
	SCS-E2
	SSDB-E4
	Standard Range - Double Seal
	DSSUT
	DSCS
	SSDB/SSUT
	DSSDB
	DSSDB-HP
	HCAX
	SCS/SSU

Standard Range - Single Seals

For Non-toxic, Non-hazzardous duties upto 6kg/cm 2 pressure

SSDB-E1: Single Dual Balanced Wet Seal

with unpressurized oil cup lubrication

Pressure	: Upto 6 kg/cm 2
Temperature	: Upto 150°C
Speed	: Upto 200 rpm
Size	: Upto 300 mm
Shaft run-out	: Upto 1.6 mm
Faces	: C/TC, C/Sic, Sic/Sic
Elastomers	: VITON/FEP
Options	: With/Without bearing
3D View	: Click here

Standard Range - Single Seals

For Non-toxic, Non-hazzardous duties upto 6kg/cm 2 pressure

SCS - E1: Single Dual Balanced Wet Seal

with unpressurized oil cup lubrication

Pressure	: Upto 6 kg/cm 2
Temperature	: Upto 150°C
Speed	: Upto 200 rpm
Size	: Upto 100 mm
Shaft run-out	: Upto 1.6 mm
Faces	: C/TC, C/Sic, Sic/Sic
Elastomers	: VITON/FEP

Standard Range - Single Seals

For Non-toxic, Non-hazzardous duties upto 6kg/cm 2 pressure

SSDB - E2 : Single Dual Balanced Dry Seal

Pressure	: Upto 6 kg/cm 2
Temperature	: Upto 120°C
Speed	: Upto 200 rpm
Size	: Upto 300 mm
Shaft run-out	: Upto 1.6 mm
Faces	: C/TC, C/Sic
Elastomers	: VITON/FEP

Standard Range - Single Seals

For Non-toxic, Non-hazzardous duties upto 6kg/cm 2 pressure

SCS - E2 : Single Dual Balanced Dry Seal

Pressure	: Upto 6 kg/cm 2
Temperature	Upto 120°C with proper environmental control
Speed	: Upto 200 rpm
Size	: Upto 60 mm
Shaft run-out	: Upto 1.6 mm
Faces	: C/TC, C/sic
Elastomers	: VITON/FEP

Standard Range - Single Seals

For Non-toxic, Non-hazzardous duties upto 6kg/cm 2 pressure

SSDB - E4 : Single Dual Balanced Dry Seal

for retrofit installation on worn-out SS or Glasslined shafts

Pressure	: Upto 6 kg/cm 2
Temperature	: Upto 120°C
Speed	: Upto 200 rpm
Size	: Upto 300 mm
Shaft run-out	: Upto 4.0 mm (TIR)
Faces	: C/TC, C/Sic
Elastomers	: VITON/FEP

Standard Range - Double Seals

DSSUT - Double Back to Back Unbalanced Cartridge Seal

Pressure	: Upto 10 kg/cm 2
Temperature	: Upto 400°C with proper environment control
Speed	: Upto 1440 rpm
Size	: Upto 300 mm
Faces	: C/TC, C/Sic, Sic/Sic
Elastomers	: VITON/PTFE/FEP
3D View	: Click here

Standard Range - Double Seals

DSCS: Dual Balanced Cartridge Seal

DSCS is a low cost double cartridge seals for non-critical pressure applications. Due to low cost DSCS seals can effectively replace gland packed reactors and processing equipments.

Pressure	: Upto 10 kg/cm 2
Temperature	: Upto 150°C
Speed	: Upto 1440 rpm
Size	: Upto 60 mm
Faces	: C/CER, C/TC, C/Sic
Elastomers	: VITO/FEP
3D View	: Click Here

Standard Range - Double Seals

SSDB/SSUT (Metal Free) : Double Back to Back Cartridge Seal

for SS and Glasslined reactors

Pressure	: Upto 16 kg/cm 2
Temperature	: Upto 400°C (with proper environment control)
Speed	: Upto 1440 rpm
Size	: Upto 300 mm
Faces	: C/CER, C/Sic, Sic/Sic
Elastomers	: VITON/PTFE/FEP
Options	: Metal Free Contact parts for Glasslined reactors
3D View	: Click Here

Standard Range - Double Seals

DSSDB : Double Dual Balanced Cartridge Seal (up to 40 bar pressure)

DSSDB Seals are designed to take sudden pressure reversals and have capacity to handle high pressure on either side of the seal face. Features like large cross-section floating ring and heavy duty carbon rings make DSSDB Seals ideally suited for Agitator seal application.

Pressure	: Upto 40 kg/cm 2
Temperature	: Upto 400°C with proper environmental control
Max. Speed	: 300 rpm to 700 rpm
Size	: Upto 300 mm
Faces	: C/TC, C/sic
Elastomers	: VITON/FEP
Options	: Jacket cooled housing
3D View	: Click Here

Standard Range - Double Seals

DSSDB-HP : Double Dual Balanced Cartridge Seal

DSSDB-HP are usually custom designed for high pressure capability depending upon the application.

Pressure	: Upto 120 kg/cm 2
Temperature	: Upto 400°C
Max Speed	: Upto 700 rpm
Size	: Upto 300 mm
Faces	: C/Sic
Elastomers	: VITON/FEP

Standard Range - Double Seals

HCAX: Co-axial Dual Balanced Double Seal

for retrofit installations on worn out shafts of Metalic and Glasslined Reactors

Pressure	: Upto 20 kg/cm 2
Temperature	: Upto 150°C can be extended upto 300°C
Speed	: Upto 200 rpm
Size	: Upto 250 mm
Faces	: C/TC, C/Sic
Elastomers	: VITON/FEP
3D View	: Click Here

Standard Range - Double Seals

SCS/SSU : Specialized Cartridge Seals

for bottom entry choppers, vertical and horizontal grinding mills, sterile applications etc.

Pressure	: Upto 10 kg/cm 2
Temperature	: Upto 150°C
Speed	: Upto 2900 rpm
Size	: Upto 60 mm
Faces	: C/TC, TC/TC, TC/Sic, Sic/Sic
Elastomers	: VITON/FEP
3D View	: Click Here